72 hours Continuous Operating Time High output Continuous Mill

Product Detail

ALX series of continuous mill
ALX series continuous powder mill change the original mill discharge structure, can according to user requirements in a variety of ways to adjust the partical machine for coarse, medium and fine or ultrafine grinding, can deal with all kinds of hardness of the material. Suitable for silicate products, new building material, refractory material, quartz sand, pottery and porcelain uranium, black and non-ferrous metal, etc
ALX series continuous powder mill could adopt stainless steel, hard alloy, polyurethane, alumina, manganese steel and other linings and could be equipped with frequency control system according to the users’ requirement.
Technical parameters

specifications and models	barrel rotate speed(r/min)	Ball capacity(t)	Feeding Granularity (mm)	Discharging Granularity (mm)	Output (t/h)	Motor power(kw)
?900×1800	36~38	1.5	=20	0.075-0.89	0.65-2	18.5
?900×3000	36	2.7	=20	0.075-0.89	1.1-3.5	22
?1200×2400	36	3	=25	0.075-0.6	1.5-4.8	30
?1200×3000	36	3.5	=25	0.074-0.4	1.6-5	37
?1200×4500	32.4	5	=25	0.074-0.4	1.6-5.8	55
?1500×3000	29.7	7.5	=25	0.074-0.4	2-5	75
?1500×4500	27	11	=25	0.074-0.4	3-6	110
?1500×5700	28	12	=25	0.074-0.4	3.5-6	130
?1830×3000	25.4	11	=25	0.074-0.4	4-10	130
?1830×4500	25.4	15	=25	0.074-0.4	4.5-12	155
?1830×6400	24.1	21	=25	0.074-0.4	6.5-15	210
?1830×7000	24.1	23	=25	0.074-0.4	7.5-17	245
?2100×3000	23.7	15	=25	0.074-0.4	6.5-36	155
?2100×4500	23.7	24	=25	0.074-0.4	8-43	245
?2100×7000	23.7	26	=25	0.074-0.4	8-48	280
?2200×4500	21.5	27	=25	0.074-0.4	9-45	280
?2200×6500	21.7	35	=25	0.074-0.4	14-26	380
?2200×7000	21.7	35	=25	0.074-0.4	15-28	380
?2200×7500	21.7	35	=25	0.074-0.4	15-30	380
?2400×3000	21	23	=25	0.074-0.4	7-50	245
?2400×4500	21	30	=25	0.074-0.4	8.5-60	320
?2700×4000	20.7	40	=25	0.074-0.4	12-80	400